Instructions - Guide

Tumbler Care Instructions:

Glass Cups Care Instructions:

DTF (Direct To Film) Pressing Instructions:

TEMPERATURE: 310F | TIME: 15 Seconds | PRESSURE: FIRM/HEAVY -

Preheat your press at 310 F and set timer to 15 seconds - (Remove any lint from your garment with a lint roller) optional - (Pre-press garment for 5-10 seconds to remove moisture) optional
Place the transfer as desired (white side facing down, image facing up)
Press 15 seconds firm pressure/heavy pressure.
Remove the garment away from press and let it sit for 15 seconds (helps cool faster)
Peel slowly (do not pull) making sure there is no lifting.
Place a parchment paper, Teflon sheet, or backing film to repress for another 10 seconds to seal image

We aren’t responsible for any mishandling of transfer!

UV-DTF (WRAPS) Instructions:

Clean your Cup with a microfiber cloth (Don't use alcohol)
Place your cup on a stable surface
Start by placing your design face down and pass squeegee through with light pressure.
Peel your backing slowly by rolling method (this will avoid damage)
Place design transfer into your cup carefully as desire (Keep in mind once design is place you can't reposition)
Once position use your squeegee or hand to adhere and push out any bubbles
Peel off clear film carefully (nice and slow making sure everything has properly adhered)

Care Instructions:

Hand wash only. (Don't soak or drench in water)
DO NOT Dishwash or microwave.
Do not scrub excessively they are long lasting and durable, but still handle with care

We are not responsible for any missed used and handling of transfer.